Reference Guide

redistribute (RIP)
This command configures RIP protocol to redistribute routes from the specified source protocol/routers.
There are five possible match options. When you submit the command redistribute ospf match match-
type the match-type or types specified are added to any match types presently being redistributed.
Internal routes are redistributed by default.
Default
•
metric—not-configured
•
match—internal
Format for
OSPF as
source
protocol
redistribute ospf [metric 0-15] [match [internal] [external 1] [external 2]
[nssa-external 1] [nssa-external-2]]
Format for
other source
protocol
redistribute {bgp | static | connected} [metric 0-15]
Mode Router RIP Config
no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source protocol/
routers.
Format
no redistribute {ospf | bgp | static | connected} [metric]
[match [internal] [external 1] [external 2] [nssa-external 1]
[nssa-external-2]]
Mode Router RIP Config
show ip rip
This command displays information relevant to the RIP router.
Format
show ip rip
Modes
•
Privileged EXEC
•
User EXEC
Term Definition
RIP Admin Mode
Enable or disable.
Split Horizon Mode
None, simple or poison reverse.
Auto Summary Mode
Enable or disable. If enabled, groups of adjacent routes are summarized into
single entries, in order to reduce the total number of entries The default is
enable.
Host Routes Accept Mode
Enable or disable. If enabled the router accepts host routes. The default is
enable.
Routing Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 570