Reference Guide

Format serviceport ipv6 neighbor ipv6-address macaddr
Mode Privileged EXEC
Parameter Description
ipv6-address
The IPv6 address of the neighbor or interface.
macaddr
The link-layer address.
no serviceport ipv6 neighbor
Use this command to remove IPv6 neighbors from the IPv6 neighbor table for the service port.
Format no serviceport ipv6 neighbor ipv6-address macaddr
Mode Privileged EXEC
network ipv6 address
Use the options of this command to manually configure IPv6 global address, enable/disable stateless
global address autoconfiguration and to enable/disable dhcpv6 client protocol information for the
network port. Multiple IPv6 addresses can be configured on the network port.
Format
network ipv6 address {address/prefix-length [eui64] |
autoconfig | dhcp}
Mode Privileged EXEC
Parameter Description
address
IPv6 prefix in IPv6 global address format.
prefix-length
IPv6 prefix length value.
eui64 Formulate IPv6 address in eui64 format.
autoconfig Configure stateless global address autoconfiguration capability.
dhcp Configure dhcpv6 client protocol.
no network ipv6 address
The command no network ipv6 address removes all configured IPv6 prefixes.
Use this command with the address option to remove the manually configured IPv6 global address on
the network port interface.
Use this command with the autoconfig option to disable the stateless global address autoconfiguration
on the network port.
Use this command with the dhcp option disables the dhcpv6 client protocol on the network port.
IPv6 Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 576