Reference Guide

For 220 Series switches, specify the port name in unit/slot/port format.
For 210 Series switches, specify the port name in slot/port format.
Format show classofservice packet-drop-count unit/slot/port | slot/
port
Mode Privileged EXEC
The following shows an example of the command and its output:
(Extreme 210) #show classofservice packet-drop-count 0/1
Packets dropped on COS queue 0................. 0
Packets dropped on COS queue 1................. 0
Packets dropped on COS queue 2................. 0
Packets dropped on COS queue 3................. 0
Packets dropped on COS queue 4................. 0
Packets dropped on COS queue 5................. 0
Packets dropped on COS queue 6................. 0
Packets dropped on COS queue 7................. 0
Time Since Counters Last Cleared............... 0 day 0 hr 3 min 22 sec
show classofservice trust
This command displays the current trust mode setting for a specific interface. The unit/slot/port
parameter is optional and is only valid on platforms that support independent per-port class of service
mappings. If you specify an interface, the command displays the port trust mode of the interface. If you
do not specify an interface, the command displays the most recent global configuration settings.
Format
show classofservice trust [unit/slot/port]
Mode Privileged EXEC
Column Meaning
Class of Service Trust Mode The the trust mode, which is either Dot1P, IP DSCP, or Untrusted.
Non-IP Trac Class (IP DSCP mode only) The trac class used for non-IP trac.
Untrusted Trac Class (Untrusted mode only) The trac class used for all untrusted trac.
show interfaces cos-queue
This command displays the class-of-service queue configuration for the specified interface. The unit/
slot/port parameter is optional and is only valid on platforms that support independent per-port class
of service mappings. If specified, the class-of-service queue configuration of the interface is displayed. If
omitted, the most recent global configuration settings are displayed.
Format
show interfaces cos-queue [unit/slot/port]
Mode Privileged EXEC
Quality of Service Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 595