Reference Guide

Default None
Format class-map rename class-map-name new-class-map-name
Mode Global Config
match ethertype
This command adds to the specified class definition a match condition based on the value of the
ethertype. The ethertype value is specified as one of the following keywords: appletalk, arp, ibmsna,
ipv4, ipv6, ipx, mplsmcast, mplsucast, netbios, novell, pppoe, rarp or as a custom EtherType value in the
range of 0x0600-0xFFFF. Use the [not] option to negate the match condition.
Format match [not] ethertype {keyword | custom 0x0600-0xFFFF}
Mode Class-Map Config Ipv6-Class-Map Config
match any
This command adds to the specified class definition a match condition whereby all packets are
considered to belong to the class. Use the [not] option to negate the match condition.
Default
None
Format match [not] any
Mode Class-Map Config Ipv6-Class-Map Config
match class-map
This command adds to the specified class definition the set of match conditions defined for another
class. The refclassname is the name of an existing DiServ class whose match conditions are being
referenced by the specified class definition.
Quality of Service Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 600