Reference Guide

match secondary-vlan
This command adds to the specified class definition a match condition based on the value of the layer 2
secondary VLAN Identifier field (the inner 802.1Q tag of a double VLAN tagged packet). The secondary
VLAN ID is an integer from 0 to 4093. Use the [not] option to negate the match condition.
Default None
Format match [not] secondary-vlan 0-4093
Mode Class-Map Config
Ipv6-Class-Map Config
DiServ Policy Commands
Use the DiServ policy commands to specify trac conditioning actions, such as policing and marking,
to apply to trac classes
Use the policy commands to associate a trac class that you define by using the class command set
with one or more QoS policy attributes. Assign the class/policy association to an interface to form a
service. Specify the policy name when you create the policy.
Each trac class defines a particular treatment for packets that match the class definition. You can
associate multiple trac classes with a single policy. When a packet satisfies the conditions of more
than one class, preference is based on the order in which you add the classes to the policy. The first
class you add has the highest precedence.
This set of commands consists of policy creation/deletion, class addition/removal, and individual policy
attributes.
Note
The only way to remove an individual policy attribute from a class instance within a policy is
to remove the class instance and re-add it to the policy. The values associated with an existing
policy attribute can be changed without removing the class instance.
The CLI command root is policy-map.
assign-queue
This command modifies the queue id to which the associated trac stream is assigned. The queueid is
an integer from 0 to n-1, where n is the number of egress queues supported by the device.
Format
assign-queue queueid
Mode Policy-Class-Map Config
Incompatibilities Drop
drop
This command specifies that all packets for the associated trac stream are to be dropped at ingress.
Quality of Service Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 607