Reference Guide

Format show class-map class-name
Modes
•
Privileged EXEC
•
User EXEC
If the class-name is specified the following fields are displayed:
Column Meaning
Class Name The name of this class.
Class Type A class type of all means every match criterion defined for the class is evaluated simultaneously
and must all be true to indicate a class match.
Class Layer3
Protocol
The Layer 3 protocol for this class. Possible values are IPv4 and IPv6value is IPv4.
Match Criteria The Match Criteria fields are only displayed if they have been configured. Not all platforms
support all match criteria values. They are displayed in the order entered by the user. The fields
are evaluated in accordance with the class type. The possible Match Criteria fields are:
Destination IP Address, Destination Layer 4 Port, Destination MAC Address, Ethertype, Source
MAC Address, VLAN, Class of Service, Every, IP DSCP, IP Precedence, IP TOS, Protocol Keyword,
Reference Class, Source IP Address, and Source Layer 4 Port.
Values The values of the Match Criteria.
If you do not specify the Class Name, this command displays a list of all defined DiServ classes. The
following fields are displayed:
Column
Meaning
Class Name The name of this class. (Note that the order in which classes are displayed is not necessarily the
same order in which they were created.)
Class Type A class type of all means every match criterion defined for the class is evaluated simultaneously
and must all be true to indicate a class match.
Ref Class Name The name of an existing DiServ class whose match conditions are being referenced by the
specified class definition.
show diserv
This command displays the DiServ General Status Group information, which includes the current
administrative mode setting as well as the current and maximum number of rows in each of the main
DiServ private MIB tables. This command takes no options.
Format
show diffserv
Mode Privileged EXEC
Column Meaning
DiServ Admin mode The current value of the DiServ administrative mode.
Class Table Size Current/Max The current and maximum number of entries (rows) in the Class Table.
Class Rule Table Size Current/Max The current and maximum number of entries (rows) in the Class Rule
Table.
Policy Table Size Current/Max The current and maximum number of entries (rows) in the Policy Table.
Quality of Service Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 614