Reference Guide

Column Meaning
Policy Instance Table Size
Current/Max
The current and maximum number of entries (rows) in the Policy Instance
Table.
Policy Instance Table Max
Current/Max
The current and maximum number of entries (rows) for the Policy Instance
Table.
Policy Attribute Table Max
Current/Max
The current and maximum number of entries (rows) for the Policy
Attribute Table.
Service Table Size Current/Max The current and maximum number of entries (rows) in the Service Table.
show policy-map
This command displays all configuration information for the specified policy. The policyname is the
name of an existing DiServ policy.
Format show policy-map [policyname]
Mode Privileged EXEC
If the Policy Name is specified the following fields are displayed:
Column Meaning
Policy Name The name of this policy.
Policy Type The policy type (only inbound policy definitions are supported for this platform.)
Class Members The class that is a member of the policy.
The following information is repeated for each class associated with this policy (only those policy
attributes actually configured are displayed):
Column
Meaning
Assign Queue Directs trac stream to the specified QoS queue. This allows a trac classifier to specify
which one of the supported hardware queues are used for handling packets belonging to
the class.
Class Name The name of this class.
Committed Burst Size
(KB)
The committed burst size, used in simple policing.
Committed Rate
(Kbps)
The committed rate, used in simple policing.
Conform Action The current setting for the action taken on a packet considered to conform to the policing
parameters. This is not displayed if policing is not in use for the class under this policy.
Conform Color Mode The current setting for the color mode. Policing uses either color blind or color aware
mode. Color blind mode ignores the coloration (marking) of the incoming packet. Color
aware mode takes into consideration the current packet marking when determining the
policing outcome.
Conform COS The CoS mark value if the conform action is set-cos-transmit.
Conform DSCP Value The DSCP mark value if the conform action is set-dscp-transmit.
Conform IP
Precedence Value
The IP Precedence mark value if the conform action is set-prec-transmit.
Quality of Service Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 615