Reference Guide

Parameter Description
accesslistnumbe
r
Identifies a specific IP ACL. The range is 1 to 199.
sequence A optional sequence number that indicates the order of this IP access list relative to the
other IP access lists already assigned to this interface and direction. The range is 1 to
4294967295.
vlan-id
A VLAN ID associated with a specific IP ACL in a given direction.
name
The name of the Access Control List.
The following shows an example of the command.
(Extreme 220) (Config) #ip access-group ip1 control-plane
no ip access-group
This command removes a specified IP ACL from an interface.
Default none
Format no ip access-group {accesslistnumber|name} {{control-plane|
in|out}|vlan vlan-id {in|out}}
Mode
•
Interface Config
•
Global Config
The following shows an example of the command.
(Extreme 220) (Routing)(Config)#no ip access-group ip1 control-plane
acl-trapflags
This command enables the ACL
trap mode.
Default
Disabled
Format acl-trapflags
Mode Global Config
no acl-trapflags
This command disables the ACL trap mode.
Format
no acl-trapflags
Mode Global Config
Quality of Service Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 637