Reference Guide

Default Trac class 7
Format auto-voip protocol-based {remark remark-priority | traffic-
class tc}
Mode
•
Global Config
•
Interface Config
no auto-voip protocol-based
Use this command to reset the global protocol based auto VoIP remarking priority or trac-class to the
default.
Format no auto-voip protocol-based {remark remark-priority |
traffic-class tc}
Mode
•
Global Config
•
Interface Config
auto-voip vlan
Use this command to configure the global Auto VoIP VLAN ID. The VLAN behavior is depend on the
configured auto VoIP mode. The auto-VoIP VLAN is the VLAN used to segregate VoIP trac from other
non-voice trac. All VoIP trac that matches a value in the known OUI list gets assigned to this VoIP
VLAN.
Default
None
Format auto-voip vlan vlan-id
Mode Global Config
no auto-voip vlan
Use the no form of the command to reset the auto-VoIP VLAN ID to the default value.
Format
no auto-voip vlan
Mode Global Config
show auto-voip
Use this command to display the auto VoIP settings on the interface or interfaces of the switch.
Format
show auto-voip {protocol-based|oui-based} interface {unit/
slot/port|all}
Mode Privileged EXEC
Quality of Service Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 658