Reference Guide

10 200 Series Log Messages
Core
Utilities
Management
Switching
QoS
Routing/IPv6 Routing
Stacking
Technologies
O/S Support
This chapter lists common log messages associated with 200 Series switches, along with information
regarding the cause of each message. There is no specific action that can be taken per message. When
a problem is being diagnosed, a set of these messages in the event log, along with an understanding of
the system configuration and details of the problem, will help Extreme Networks determine the root
cause of the problem. The most recent log messages are displayed first.
Note
This chapter is not a complete list of all syslog messages.
Core
Table 15: BSP Log Messages
Component Message Cause
BSP Event(0xaaaaaaaa) Switch has restarted.
BSP Starting code... BSP initialization complete, starting 200
Series application.
Table 16: NIM Log Messages
Component Message Cause
NIM NIM: L7_ATTACH out of order for interface
unit x slot x port x
Interface creation out of order.
NIM NIM: Failed to find interface at unit x slot x
port x for event(x)
There is no mapping between the USP and
Interface number.
NIM NIM: L7_DETACH out of order for interface
unit x slot x port x
Interface creation out of order.
NIM NIM: L7_DELETE out of order for interface
unit x slot x port x
Interface creation out of order.
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 664