Reference Guide

Table 18: System Log Messages (continued)
Component Message Cause
SYSTEM File filename: same version (version
num) but the sizes (version size –
expected version size) dier
The configuration file which was loaded was
of a dierent size than expected for the
version number. This message indicates the
configuration file needed to be migrated to
the version number appropriate for the code
image. This message may appear after
upgrading the code image to a more current
release.
SYSTEM Migrating config file filename from version
version num to version num
The configuration file identified was migrated
from a previous version number. Both the old
and new version number are specified. This
message may appear after upgrading the
code image to a more current release.
SYSTEM Building Defaults Configuration did not exist or could not be
read for the specified feature. Default
configuration values will be used.
SYSTEM sysapiCfgFileGet failed size = expected
size of file version = expected
version
Configuration did not exist or could not be
read for the specified feature. This message is
usually followed by a message indicating that
default configuration values will be used.
Utilities
Table 19: Trap Mgr Log Message
Component Message Cause
Trap Mgr Link Up/Down: unit/slot/port An interface changed link state.
Table 20: DHCP Filtering Log Messages
Component Message Cause
DHCP (Dynamic
Host
Configuration
Protocol) Filtering
Unable to create r/w lock for DHCP Filtering Unable to create semaphore used for dhcp
filtering configuration structure.
DHCP Filtering Failed to register with nv Store. Unable to register save and restore functions
for configuration save.
DHCP Filtering Failed to register with NIM Unable to register with NIM for interface
callback functions.
DHCP Filtering Error on call to sysapiCfgFileWrite file Error on trying to save configuration.
200 Series Log Messages
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 666