Reference Guide

Table 26: DHCPv6 Client Log Messages
Component Message Cause
DHCP6 Client ip6Map dhcp add failed. This message appears when the update of a
DHCP leased IP address to IP6Map fails.
DHCP6 Client osapiNetAddrV6Add failed on interface xxx. This message appears when the update of a
DHCP leased IP address to the kernel IP stack
fails.
DHCP6 Client Failed to add DNS Server xxx to DNS Client. This message appears when the update of a
DNS6 Server address given by the DHCPv6
Server to the DNS6 Client fails.
DHCP6 Client Failed to add Domain name xxx to DNS Client. This message appears when the update of a
DNS6 Domain name info given by the
DHCPv6 Server to the DNS6 Client fails.
Table 27: DHCPv4 Client Log Messages
Component Message Cause
DHCP4 Client Unsupported subOption (xxx) in Vendor
Specific Option in received DHCP pkt
This message appears when a message is
received from the DHCP Server that contains
an un-supported Vendor Option.
DHCP4 Client Failed to acquire an IP address on xxx; DHCP
Server did not respond.
This message appears when the DHCP Client
fails to lease an IP address from the DHCP
Server.
DHCP4 Client DNS name server entry add failed. This message appears when the update of a
DNS Domain name server info given by the
DHCP Server to the DNS Client fails.
DHCP4 Client DNS domain name list entry addition failed. This message appears when the update of a
DNS Domain name list info given by the DHCP
Server to the DNS Client fails.
DHCP4 Client Interface xxx Link State is Down. Connect the
port and try again.
This message appears when the Network
protocol is configured with DHCP without any
active links in the Management VLAN.
Management
Table 28: SNMP Log Message
Component Message Cause
SNMP (Simple
Network
Management
Protocol)
EDB Callback: Unit Join: x. A new unit has joined the stack.
200 Series Log Messages
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 669