Reference Guide

Table 34: SSLT Log Messages (continued)
Component Message Cause
SSLT SSLT: Msg Queue is full, event = XXXX Failed to send the received message to the
SSLT message queue as message queue is
full. XXXX indicates the event to be sent.
SSLT SSLT: Unknown UI event in message,
event = XXXX
Failed to dispatch the received UI event to the
appropriate SSLT function as it’s an invalid
event. XXXX indicates the event to be
dispatched.
SSLT ssltApiCnfgrCommand: Failed calling
ssltIssueCmd.
Failed to send the message to the SSLT
message queue.
SSLT SSLT: Error loading certificate from file XXXX Failed while loading the SSLcertificate from
specified file. XXXX indicates the file from
where the certificate is being read.
SSLT SSLT: Error loading private key from file Failed while loading private key for SSL
connection.
SSLT SSLT: Error setting cipher list (no valid
ciphers)
Failed while setting cipher list.
SSLT SSLT: Could not delete the SSL semaphores Failed to delete SSL semaphores during
cleanup of all resources associated with the
OpenSSL Locking semaphores.
Table 35: User_Manager Log Messages
Component Message Cause
User_Manager User Login Failed for XXXX Failed to authenticate user login. XXXX
indicates the username to be authenticated.
User_Manager Access level for user XXXX could not be
determined. Setting to level 1.
Invalid access level specified for the user. The
access level is set to level 1. XXXX indicates
the username.
User_Manager Could not migrate config file XXXX from
version YYYY to ZZZZ. Using defaults.
Failed to migrate the config file. XXXX is the
config file name. YYYY is the old version
number and ZZZZ is the new version number.
Switching
Table 36: Protected Ports Log Messages
Component Message Cause
Protected Ports Protected Port: failed to save configuration This appears when the protected port
configuration cannot be saved.
Protected Ports protectedPortCnfgrInitPhase1Process: Unable
to create r/w lock for protected Port
This appears when protectedPortCfgRWLock
Fails.
Protected Ports protectedPortCnfgrInitPhase2Process: Unable
to register for VLAN change callback
This appears when nimRegisterIntfChange
with VLAN fails.
200 Series Log Messages
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 672