Reference Guide

Table 43: FDB Log Message
Component Message Cause
FDB (forwarding
database)
fdbSetAddressAgingTimeOut: Failure setting
fid %d address aging timeout to %d
Unable to set the age time in the hardware.
Table 44: Double VLAN Tag Log Message
Component Message Cause
Double Vlan Tag dvlantagIntfIsConfigurable: Error accessing
dvlantag config data for interface %d
A default configuration does not exist for this
interface. Typically a case when a new
interface is created and has no
preconfiguration.
Table 45: IPv6 Provisioning Log Message
Component Message Cause
IPV6 Provisioning ipv6ProvIntfIsConfigurable: Error accessing
IPv6 Provisioning config data for interface %d
A default configuration does not exist for this
interface. Typically a case when a new
interface is created and has no
preconfiguration.
Table 46: MFDB Log Message
Component Message Cause
MFDB mfdbTreeEntryUpdate: entry does not exist Trying to update a non existing entry.
Table 47: 802.1Q Log Messages
Component Message Cause
802.1Q dot1qIssueCmd: Unable to send message %d to
dot1qMsgQueue for vlan %d - %d msgs in queue
dot1qMsgQueue is full.
802.1Q dot1qVlanCreateProcess: Attempt to create a
vlan with an invalid vlan id %d ;
VLAN %d not in range,
This accommodates for reserved vlan IDs:
4094 - x.
802.1Q dot1qMapIntfIsConfigurable: Error accessing
DOT1Q config data for interface %d in
dot1qMapIntfIsConfigurable.
A default configuration does not exist for this
interface. Typically a case when a new
interface is created and has no
preconfiguration.
802.1Q dot1qVlanDeleteProcess: Deleting the default
VLAN
Typically encountered during clear Vlan and
clear config.
802.1Q dot1qVlanMemberSetModify,
dot1qVlanTaggedMemberSetModify: Dynamic
entry %d can only be modified after it is
converted to static
If this vlan is a learnt via GVRP then we cannot
modify its member set via management.
802.1Q dtl failure when adding ports to vlan id %d -
portMask = %s
Failed to add the ports to VLAN entry in
hardware.
200 Series Log Messages
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 676