Reference Guide

Table 47: 802.1Q Log Messages (continued)
Component Message Cause
802.1Q dtl failure when deleting ports from vlan id %d -
portMask = %s
Failed to delete the ports for a VLAN entry
from the hardware.
802.1Q dtl failure when adding ports to tagged list for
vlan id %d - portMask = %s
Failed to add the port to the tagged list in
hardware.
802.1Q dtl failure when deleting ports from tagged list
for vlan id %d - portMask = %s"
Failed to delete the port to the tagged list
from the hardware.
802.1Q dot1qTask: unsuccessful return code on receive
from dot1qMsgQueue: %08x"
Failed to receive the dot1q message from
dot1q message queue.
802.1Q Unable to apply VLAN creation request for VLAN
ID %d, Database reached MAX VLAN count!
Failed to create VLAN ID, VLAN Database
reached maximum values.
802.1Q Attempt to create a vlan (%d) that already exists Creation of the existing Dynamic VLAN ID
from the CLI.
802.1Q DTL call to create VLAN %d failed with rc %d" Failed to create VLAN ID in hardware.
802.1Q Problem unrolling data for VLAN %d Failed to delete VLAN from the VLAN
database after failure of VLAN hardware
creation.
802.1Q VLan %d does not exist Failed to delete VLAN entry.
802.1Q VLan %d requestor type %d does not exist Failed to delete dynamic VLAN ID if the given
requestor is not valid.
802.1Q Can not delete the VLAN, Some unknown
component has taken the ownership!
Failed to delete, as some unknown
component has taken the ownership.
802.1Q Not valid permission to delete the VLAN %d
requestor %d
Failed to delete the VLAN ID as the given
requestor and VLAN entry status are not
same.
802.1Q VLAN Delete Call failed in driver for vlan %d Failed to delete VLAN ID from the hardware.
802.1Q Problem deleting data for VLAN %d Failed to delete VLAN ID from the VLAN
database.
802.1Q Dynamic entry %d can only be modified after it is
converted to static
Failed to modify the VLAN group filter
802.1Q Cannot find vlan %d to convert it to static Failed to convert Dynamic VLAN to static
VLAN. VLAN ID not exists.
802.1Q Only Dynamically created VLANs can be
converted
Error while trying to convert the static created
VLAN ID to static.
802.1Q Cannot modify tagging of interface %s to non
existence vlan %d"
Error for a given interface sets the tagging
property for all the VLANs in the vlan mask.
802.1Q Error in updating data for VLAN %d in VLAN
database
Failed to add VLAN entry into VLAN
database.
802.1Q DTL call to create VLAN %d failed with rc %d Failed to add VLAN entry in hardware.
802.1Q Not valid permission to delete the VLAN %d Failed to delete static VLAN ID. Invalid
requestor.
802.1Q Attempt to set access vlan with an invalid vlan id
%d
Invalid VLAN ID.
200 Series Log Messages
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 677