Reference Guide

Format show authorization methods
Mode Privileged EXEC
The following example shows CLI display output for the command.
(Extreme 220) #show authorization methods
Command Authorization List Method
-------------------------- --------------------------------------
dfltCmdAuthList tacacs none
list2 none undefined
list4 tacacs undefined
Line Command Method List
------------ ------------------------------
Console dfltCmdAuthList
Telnet dfltCmdAuthList
SSH dfltCmdAuthList
Exec Authorization Method List
----------------------- --------------------------------------
dfltExecAuthList tacacs none
list2 none undefined
list4 tacacs undefined
Line Exec Method List
------------ ------------------------------
Console dfltExecAuthList
Telnet dfltExecAuthList
SSH dfltExecAuthList
enable authentication
Use this command to specify the authentication method list when accessing a higher privilege level
from a remote Telnet or console.
Format
enable authentication {default | list-name}
Mode Line Config
Parameter Description
default Uses the default list created with the aaa authentication enable command.
list-name
Uses the indicated list created with the aaa authentication enable command.
The following example specifies the default authentication method when accessing a higher privilege
level console.
(Extreme 220) (Config)# line console
(Extreme 220)(config-line)# enable authentication default
no enable authentication
Use this command to return to the default specified by the enable authentication command.
Format
no enable authentication
Mode Line Config
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 70