Reference Guide

Enter new password:********
Confirm new password:********
The following example changes the password for user 'test'.
(Extreme 220) (Config) # username test level 15 override-complexity-check password
Enter new password:********
Confirm new password:********
no username
Use this command to remove a user name.
Format no username name
Mode Global Config
username nopassword
Use this command to remove an existing user’s password (NULL password).
Format username name nopassword [level level]
Mode Global Config
Parameter Description
name
The name of the user. Range: 1-32 characters.
password The authentication password for the user. Range 8-64 characters.
level
The user level. level 0 can be assigned by a level 15 user to another user to suspend that user’s
access. Range is 0-15.
username unlock
Use this command to allows a locked user account to be unlocked. Only a user with level 1 access can
reactivate a locked user account.
Format
username name unlock
Mode Global Config
username snmpv3 accessmode
This command specifies the SNMPv3 access privileges for the specified login user. The valid
accessmode values are readonly or readwrite. The username is the login user name for which the
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 72