Reference Guide

Parameter Description
name
Name of the user. Range is 1-20 characters.
The following example shows user login history outputs.
Console>show users login-history
Login Time Username Protocol Location
-------------------- --------- --------- ---------------
Jan 19 2005 08:23:48 Bob Serial
Jan 19 2005 08:29:29 Robert HTTP 172.16.0.8
Jan 19 2005 08:42:31 John SSH 172.16.0.1
Jan 19 2005 08:49:52 Betty Telnet 172.16.1.7
login authentication
Use this command to specify the login authentication method list for a line (console, Telnet, or SSH).
The default configuration uses the default set with the command aaa authentication login.
Format login authentication {default | list-name}
Mode Line Configuration
Parameter Description
default Uses the default list created with the aaa authentication login command.
list-name
Uses the indicated list created with the aaa authentication login command.
The following example specifies the default authentication method for a console.
(Extreme 220) (Config) # line console
(Extreme 220) (config-line)# login authentication default
no login authentication
Use this command to return to the default specified by the authentication login command.
password
This command allows the currently logged in user to change his or her password without having level 15
privileges.
Format
password
Mode User EXEC
The following is an example of the command.
console>password
Enter old password:********
Enter new password:********
Confirm new password:********
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 77