Reference Guide

password (aaa IAS User Config)
This command is used to configure a password for a user. An optional parameter [encrypted] is
provided to indicate that the password given to the command is already preencrypted.
Format password password [encrypted]
Mode aaa IAS User Config
The following is an example of adding a MAB Client to the Internal user database.
(Extreme 220) #
(Extreme 220) #configure
(Extreme 220) (Config) #aaa ias-user username 1f3ccb1157
(Extreme 220) (Config-aaa-ias-User)#password 1f3ccb1157
(Extreme 220) (Config-aaa-ias-User)#exit
(Extreme 220) (Config) #
no password (aaa IAS User Config)
This command is used to clear the password of a user.
Format no password
Mode aaa IAS User Config
The following shows an example of the command.
(Extreme 220) #
(Extreme 220) #configure
(Extreme 220) (Config) #aaa ias-user username client-1
(Extreme 220) (Config-aaa-ias-User)#password client123
(Extreme 220) (Config-aaa-ias-User)#no password
enable password (Privileged EXEC)
Use the enable password configuration command to set a local password to control access to the
privileged EXEC mode.
Format
enable password [password [encrypted]]
Mode Privileged EXEC
Parameter Description
password
Password string. Range: 8-64 characters.
encrypted Encrypted password you entered, copied from another switch configuration. The encrypted
password should be 128 characters long because the assumption is that this password is
already encrypted with AES.
The following shows an example of the command.
(Extreme 220) #enable password testtest
(Extreme 220) #enable password
e8d63677741431114f9e39a853a15e8fd35ad059e2e1b49816c243d7e08152b052eafbf23b528d348cdba1b1b7a
b91be842278e5e970dbfc62d16dcd13c0b864 encrypted
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 79