Reference Guide

(Extreme 220) #enable password
Enter old password:********
Enter new password:********
Confirm new password:********
no enable password (Privileged EXEC)
Use the no enable password command to remove the password requirement.
Format no enable password
Mode Privileged EXEC
passwords min-length
Use this command to enforce a minimum password length for local users. The value also applies to the
enable password. The valid range is 8-64.
Default 8
Format passwords min-length 8-64
Mode Global Config
no passwords min-length
Use this command to set the minimum password length to the default value.
Format
no passwords min-length
Mode Global Config
passwords history
Use this command to set the number of previous passwords that shall be stored for each user account.
When a local user changes his or her password, the user will not be able to reuse any password stored
in password history. This ensures that users don’t reuse their passwords often. The valid range is 0-10.
Default
0
Format passwords history 0-10
Mode Global Config
no passwords history
Use this command to set the password history to the default value.
Format
no passwords history
Mode Global Config
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 80