Reference Guide

Default Disable
Format passwords strength-check
Mode Global Config
no passwords strength-check
Use this command to set the password strength checking to the default value.
Format no passwords strength-check
Mode Global Config
passwords strength maximum consecutive-characters
Use this command to set the maximum number of consecutive characters to be used in password
strength. The valid range is 0-15. The default is 0. Minimum of 0 means no restriction on that set of
characters.
Default 0
Format passwords strength maximum consecutive-characters 0-15
Mode Global Config
passwords strength maximum repeated-characters
Use this command to set the maximum number of repeated characters to be used in password
strength. The valid range is 0-15. The default is 0. Minimum of 0 means no restriction on that set of
characters.
Default
0
Format passwords strength maximum consecutive-characters 0-15
Mode Global Config
passwords strength minimum uppercase-letters
Use this command to enforce a minimum number of uppercase letters that a password should contain.
The valid range is 0-16. The default is 2. Minimum of 0 means no restriction on that set of characters.
Default
2
Format passwords strength minimum uppercase-letters 0-16
Mode Global Config
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 82