Reference Guide

no aaa session-id
Use this command in Global Config mode to reset the aaa session-id behavior to the default.
Format no aaa session-id [unique]
Mode Global Config
aaa accounting
Use this command in Global Config mode to create an accounting method list for user EXEC sessions,
user-executed commands, or DOT1X. This list is identified by default or a user-specified list_name.
Accounting records, when enabled for a line-mode, can be sent at both the beginning and at the end
(start-stop) or only at the end (stop-only). If none is specified, then accounting is disabled for the
specified list. If tacacs is specified as the accounting method, accounting records are notified to a
TACACS+ server. If radius is the specified accounting method, accounting records are notified to a
RADIUS server.
Note
•
A maximum of five Accounting Method lists can be created for each exec and commands
type.
•
Only the default Accounting Method list can be created for DOT1X. There is no provision to
create more.
•
The same list-name can be used for both exec and commands accounting type
•
AAA Accounting for commands with RADIUS as the accounting method is not supported.
•
Start-stop or None are the only supported record types for DOT1X accounting. Start-stop
enables accounting and None disables accounting.
•
RADIUS is the only accounting method type supported for DOT1X accounting.
Format aaa accounting {exec | commands | dot1x} {default |
list_name} {start-stop | stop-only |none} method1 [method2…]
Mode Global Config
Parameter Description
exec Provides accounting for a user EXEC terminal sessions.
commands Provides accounting for all user executed commands.
dot1x Provides accounting for DOT1X user commands.
default The default list of methods for accounting services.
list-name
Character string used to name the list of accounting methods.
start-stop Sends a start accounting notice at the beginning of a process and a stop accounting notice at
the beginning of a process and a stop accounting notice at the end of a process.
stop-only Sends a stop accounting notice at the end of the requested user process.
none Disables accounting services on this line.
method
Use either TACACS or RADIUS server for accounting purposes.
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 87