Reference Guide

The following is an example of adding a MAB Client to the Internal user database.
(Extreme 220) #
(Extreme 220) #configure
(Extreme 220) (Config) #aaa ias-user username 1f3ccb1157
(Extreme 220) (Config-aaa-ias-User)#password 1f3ccb1157
(Extreme 220) (Config-aaa-ias-User)#exit
(Extreme 220) (Config) #
no password (AAA IAS User Configuration)
Use this command to clear a user's password.
Format no password
Mode AAA IAS User Config
The following shows an example of the command.
(Extreme 220) #
(Extreme 220) #configure
(Extreme 220) (Config) #aaa ias-user username client-1
(Extreme 220) (Config-aaa-ias-User)#password client123
(Extreme 220) (Config-aaa-ias-User)#no password
clear aaa ias-users
Use this command to remove all users from the IAS database.
Format
clear aaa ias-users
Mode Privileged EXEC
show aaa ias-users
Use this command to display configured IAS users and their attributes. Passwords configured are not
shown in the show command output.
Format
show aaa ias-users [username]
Mode Privileged EXEC
The following is an example of the command.
(Extreme 220) (Routing) #
(Extreme 220) (Routing) #show aaa ias-users
UserName
-------------------
Client-1
Client-2
Following are the IAS configuration commands shown in the output of show running-config
command. Passwords shown in the command output are always encrypted.
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 89