Reference Guide

aaa ias-user username client-1
password a45c74fdf50a558a2b5cf05573cd633bac2c6c598d54497ad4c46104918f2c encrypted
exit
accounting
Use this command in Line Configuration mode to apply the accounting method list to a line config
(console/telnet/ssh).
Format accounting {exec | commands} {default | list_name}
Mode Line Configuration
Parameter Description
exec Causes accounting for an EXEC session.
commands This causes accounting for each command execution attempt. If a user is enabling accounting
for exec mode for the current line-configuration type, the user will be logged out.
default The default Accounting List.
list_name
Enter a string of not more than 15 characters.
The following is a example of the command.
(Extreme 220) (Routing) #
(Extreme 220) (Routing) #configure
(Extreme 220) (Config) #line telnet
(Extreme 220) (Routing)(Config-line)# accounting exec default
(Extreme 220) (Routing) #exit
no accounting
Use this command to remove accounting from a Line Configuration mode.
Format
no accounting {exec|commands}
Mode Line Configuration
show accounting
Use this command to display ordered methods for accounting lists.
Format
show accounting
Mode Privileged EXEC
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show accounting
Number of Accounting Notifications sent at beginning of an EXEC session: 0
Errors when sending Accounting Notifications beginning of an EXEC session: 0
Number of Accounting Notifications at end of an EXEC session: 0
Errors when sending Accounting Notifications at end of an EXEC session: 0
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 90