Reference Guide

Default enabled
Format snmp-server enable traps stpmode
Mode Global Config
no snmp-server enable traps stpmode
This command disables the sending of new root traps and topology change notification traps.
Format no snmp-server enable traps stpmode
Mode Global Config
snmp-server engineID local
This command configures the SNMP engine ID on the local device.
Default The engine ID is configured automatically, based on the device MAC address.
Format snmp-server engineID local {engineid-string| default}
Mode Global Config
Parameter Description
engineid-
string
A hexadecimal string identifying the engine ID, used for localizing configuration. Engine ID
must be an even length in the range of 6 to 32 hexadecimal characters.
default Sets the engine ID to the default string, based on the device MAC address.
Caution
Changing the engine ID will invalidate all SNMP configuration that exists on the box.
no snmp-server engineID local
This command removes the specified engine ID.
Default
The engine ID is configured automatically, based on the device MAC address.
Format no snmp-server engineID local
Mode Global Config
snmp-server filter
This command creates a filter entry for use in limiting which traps will be sent to a host.
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 98