Reference Guide

Default No filters are created by default.
Format snmp-server filter filtername oid-tree {included|excluded}
Mode Global Config
Parameter Description
filtername The label for the filter being created. The range is 1 to 30 characters.
oid-tree The OID subtree to include or exclude from the filter. Subtrees may be specified by numerical
(1.3.6.2.4) or keywords (system), and asterisks may be used to specify a subtree family (1.3.*.
4).
included The tree is included in the filter.
excluded The tree is excluded from the filter.
no snmp-server filter
This command removes the specified filter.
Default No filters are created by default.
Format snmp-server filter filtername [oid-tree]
Mode Global Config
snmp-server group
This command creates an SNMP access group.
Default
Generic groups are created for all versions and privileges using the default views.
Format snmp-server group group-name {v1 | v2c | v3 {noauth | auth |
priv}} [context context-name] [read read-view] [write write-
view] [notify notify-view]
Mode Global Config
Parameter Description
group-name The group name to be used when configuring communities or users. The range is 1 to 30
characters.
v1 This group can only access via SNMPv1.
v2 This group can only access via SNMPv2c.
v3 This group can only access via SNMPv3.
noauth This group can be accessed only when not using Authentication or Encryption. Applicable
only if SNMPv3 is selected.
auth This group can be accessed only when using Authentication but not Encryption. Applicable
only if SNMPv3 is selected.
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 99