Specifications

ManualsBrandsExtreme Networks ManualsSwitch200 Series

WWW.EXTREMENETWORKS.COM

Data Sheet

ExtremeSwitching

™

210 Series

Managed Gigabit Switches for Enterprise and SMB

Product Overview

The ExtremeSwitching 210 Series is an economical, ﬁxed-conﬁguration

family of Gigabit Ethernet Layer 2 switches designed for enterprises, branch

oces and small to medium-sized businesses looking for key features in a

ﬂexible, yet easy-to-manage solution.

The series consists of six switches including 12-, 24-, and 48-port Gigabit

Ethernet switches and 12-, 24-, and 48-port Gigabit PoE+ models. All

models provide nonblocking Gigabit per port performance and include

either 2 or 4 SFP ports for ﬁber connectivity. In addition, the 12-port PoE+

and non-PoE+ models can operate in fanless mode, making them ideal for

oce deployments.

The 210 Series also provides multiple management options. The switches

can be set-up via a web browser, or managed by Extreme Management

Center for centralized provisioning, monitoring and troubleshooting. And

for advanced users, the 210 Series oers an industry-standard CLI along

with scripting capabilities.

All ExtremeSwitching 210 Series switches include a Limited Lifetime

Warranty, whichprovides advanced hardware replacement with next

business day shipment.

Highlights

Business Alignment

• 12, 24, or 48 Gigabit Ethernet ports

• 12, 24, or 48 IEEE 802.3at PoE

port models

• 2 or 4 1000 Base-X SFP ports

• Line rate performance on all ports

• Comprehensive Layer 2 Edge

feature set

• Layer 3 Static Routing with 60 routes

for network segmentation

• Access control lists for granular

security control

• Limited Lifetime Warranty

Flexible Management Options

• Centralized enterprise management

via ExtremeManagement

• Web browser-based management

• Industry-standard command

line interface (CLI) with

scripting capabilities

Summary of content (10 pages)

PAGE 1
Data Sheet Highlights Business Alignment • 12, 24, or 48 Gigabit Ethernet ports • 12, 24, or 48 IEEE 802.
PAGE 2
Technical Specifications Hardware Summary Switch Model Ports Performance PoE Power 210-12t-GE2 • • • • 12 x 10/100/1000BaseT (RJ-45) ports 2 x 100/1000BASE-X (SFP) unpopulated ports 1 x Serial console port RJ-45 1 x 10/100 BaseT out-of-band management port 28 Gbps 20.8 Mpps N/A 210-12p-GE2 • • • • 12 x 10/100/1000BaseT PoE+ (RJ-45) ports 2 x 100/1000BASE-X (SFP) unpopulated ports 1 x Serial console port RJ-45 1 x 10/100 BaseT out-of-band management port 28 Gbps 20.
PAGE 3
Power Switch Model Minimum Heat Dissipation (BTU/HR) Minimum Power Consumption (Watts) Maximum* Heat Dissipation (BTU/HR) Maximum* Power Consumption (Watts) 36 11 63 18 161 210-12t-GE2 210-12p-GE2 56 16 130 210-24t-GE2 56 16 87 26 210-24p-GE2 72 21 198 243 210-48t-GE4 90 27 138 41 210-48p-GE4 119 35 382 482 Note *Based on Max PoE power load for PoE models Acoustics and Fan Temp Range Bystander Sound Pressure (DBA) Declared Sound Power (BA) Fan Speed # of Fans in Switch
PAGE 4
Features/Standards and Protocols CPU/Memory • ARM Cortex-A9 32-bit processor, 400 MHz clock • 512MB DRAM • 128MB Flash • 1.
PAGE 5
Routing • RFC 2697—Single-rate policing • IPv4 Static Routes (up to 60 routes) • RFC 3246—An expedited forwarding PHB • Provides basic routing through manual routing configuration • RFC 3260—New terminology and clarifications for DiffServ Quality of Service Access Control Lists (ACLs) • Permit/deny actions for inbound IP and Layer-2 traffic classification based on: • Time-Based ACL • Source/Destination IP address • TCP/UDP Source/Destination port • IP Protocol Type • Type of Service (ToS) or different
PAGE 6
• RFC 1534—Interoperability between BOOTP and DHCP • RFC 4251: SSH protocol architecture • RFC 2021—Remote network monitoring management information base version 2 • RFC 4716: SECSH public key file format • RFC 2030—Simple Network Time Protocol (SNTP) • RFC 2131—DHCP relay • RFC 2132—DHCP options and BOOTP vendor extensions • RFC 2819—Remote Network Monitoring Management Information Base • RFC 2865—RADIUS client • RFC 2866—RADIUS accounting • RFC 4419: Diffie-Hellman group exchange for the SSH transpor
PAGE 7
SNMP MIBs Operating Conditions • IEEE 802.1X MIB (IEEE 802.1-PAEMIB 2004 Revision) • Operating Temp: °0C to 50°C (32° F to 122° F) • IEEE 802.3AD MIB (IEEE 802.
PAGE 8
Environmental Compliance International EMC Certifications • EU RoHS 2011/65/EU • CISPR 32: 2012, Class A (International Emissions) • EU WEEE 2012/19/EU • AS/NZS CISPR32: 2013 • China RoHS SJ/T 11363-2006 • CISPR 24:2010 Class A (International Immunity) Regulatory and Safety North American ITE • UL 60950-1 2nd edition A2:2014, Listed Device (U.S.) • CSA 22.2 No. 60950-1 2nd edition 2014(Canada) • Complies with FCC 21CFR 1040.10 (U.S.
PAGE 9
Ordering Information Order Code Product Name Product Description ExtremeSwitching 210 Systems 16566 210-12t-GE2 210 Series 12 port 10/100/1000BASE-T, 2 1GbE unpopulated SFP ports, 1 Fixed AC PSU, L2 Switching with Static Routes, 1 country-specific power cord* 16567 210-12p-GE2 210 Series 12 port 10/100/1000BASE-T PoE+ (123W), 2 1GbE unpopulated SFP ports, 1 Fixed AC PSU, L2 Switching with Static Routes, 1 country-specific power cord* 16568 210-24t-GE2 210 Series 24 port 10/100/1000BASE-T, 2 1GbE
PAGE 10
Warranty As a customer-centric company, Extreme Networks is committed to providing quality products and solutions. In the event that one of our products fails due to a defect, we have developed a comprehensive warranty that protects you and provides a simple way to get your product repaired or media replaced as soon as possible. All 200-Series switches come with the Extreme Networks lifetime warranty against manufacturing defects. For full warranty details, visit: http://www.extremenetworks.