Specifications

Altitude 3500 Series Access Point Product Reference Guide
159
7 Select the Advanced Settings tab to strategically map BSSIDs to WLANs in order to define them as
primary WLANs.
Set RF QoS Click the Set RF QoS button to display the Set RF QOS
screen to set QoS parameters for the radio. Do not
confuse with the QoS configuration screen used for a
WLAN. The Set RF QoS screen initially appears with
default values displayed.
Select manual from the Select Parameter set drop-down
menu to edit the CW min and CW max (contention
window), AIFSN (Arbitrary Inter-Frame Space Number)
and TXOPs Time for each Access Category. These are
the QoS policies for the 802.11a or 802.11b/g radio, not
the QoS policies configured for the WLAN (as created or
edited from the Quality of Service Configuration screen).
Extreme Networks recommends only advanced users
manually set these values. If the type of data-traffic is
known, use the drop-down menu to select a 11g-wifi, 11b-
wifi, 11g-default, 11b-default, 11g-voice or 11b-voice
option. Wifi represents multimedia traffic, default is typical
data traffic and voice is for “Voice-Over-IP” supported
wireless devices.
Click OK to implement the selected QoS values and return
to the 802.11a or 802.11b/g radio configuration screen.
Clicking Cancel reverts the screen to the last saved
configuration.