Specifications

Altitude 3500 Series Access Point Product Reference Guide
577
DHCP Priorities
The following flowchart indicates the priorities used by the access point when the DHCP server is
configured for multiple options.
If the DHCP Server is configured for options 186 and 66 (to assign TFTP Server IP addresses) the
access point uses the IP address configured for option 186. Similarly, if the DHCP Server is configured
for options 187 and 67 (for the firmware file) the access point uses the file name configured for option
187. If the DHCP Server is configured for embedded and global options, the embedded options take
precedence.
Linux—BootP Server Configuration
See the following sections for information on these BootP server configurations in the Linux
environment:
● BootP Options on page 577
● BootP Priorities on page 579
BootP Options
This section contains instructions for the automatic update of the access point firmware and
configuration file using a BootP Server. The setup example described in this section includes:
● 1 Altitude 3510 or Altitude 3550 model access point
● 1 Linux/Unix BOOTP Server
● 1 TFTP Server
-------------------------------------------------------
-------------------------------------