Specifications

Configuring Access Point Security
Altitude 4700 Series Access Point Product Reference Guide
254
2 Enter the appropriate information within the LDAP Configuration field to allow the Access Point to
interoperate with the LDAP server. Consult with your LDAP server administrator for details on how
to define the values in this screen.
LDAP Server IP Enter the IP address of the external LDAP server acting as
the data source for the RADIUS server. The LDAP server
must be accessible from the WAN port or from the Access
Point’s active subnet.
Port Enter the TCP/IP port number for the LDAP server acting
as a data source for the RADIUS. The default port is 389.
Login Attribute Specify the login attribute used by the LDAP server for
authentication. In most cases, the default value should
work. Windows Active Directory users must use
“sAMAccountName” as their login attribute to successfully
login to the LDAP server.
Password Attribute Enter the password used by the LDAP server for
authentication.
Bind Distinguished
Name
Specify the distinguished name used to bind with the
LDAP server.
Password Enter a valid password for the LDAP server.
Base Distinguished
Name
Enter a name that establishes the base object for the
search. The base object is the point in the LDAP tree at
which to start searching.
Group Attribute Define the group attribute used by the LDAP server.
Group Filter Specify the group filters used by the LDAP server.