Installation guide

Chapter 3: Initial Access Point Configuration
Altitude™ 4760 Series Access Point Installation Guide
42
2 Point the Web browser to the Altitude 4760 Series Access Point’s IP address (using
https://). The following login screen displays.
3 Enter the default username admin in the Username field.
4 Enter the default password admin123 in the Password field.
5 Click the Login button to load the management interface.
NOTE
When logging in for the first time, you are prompted to change the password to enhance
device security in subsequent logins.
NOTE
If you get disconnected while running the wizard, you can connect again with the Access
Point’s actual IP address (once obtained) and resume the wizard.
6 Select the Start Wizard button to run the initial setup wizard.