Installation Guide
Table Of Contents
- Enterasys Networks, Inc. Firmware License Agreement
- Contents
- About This Guide
- Introduction
- Installation
- Specifications
- Regulatory Information
IdentiFi Wireless WS-AP3865e Installation Guide A-1
A
Specifications
ThisappendixliststhespecificationsfortheIdentiFiWirelessOutdoorAccessPointWS‐AP3865e.
Table A-1 Specifications for the WS-AP3865e
Item Specification
Enclosure material Metal enclosure IP67 rated
Power source 802.3at compliant PoE
Power consumption < 40W (Max.)
Antenna 6x RP-N Jack antenna connectors;
2.4GHz x 3,
5GHz x 3,
6x antenna terminator caps
Uplink Interface GbE Ethernet x1 with PoE
RoHS compliant Yes
Radio Configuration IEEE 802.11a/b/g/n,
2.4/5GHz dual-band;
Dual-radio, 3x3 MIMO
Water/Dust Proof Ratings NEMA Type 6
Operating temperature -40
o
C to +70
o
C (upper temperatures includes solar load and
elevation)
Altitude (feet) Operating: 10,000
Non-Operating: 50,000
Relative Humidity (% RH) Operating: 0%-95% (non-condensing)
Non-Operating: 0%-95% (condensing allowed on the outside
packaging)
Wind Up to 150Mph