Installation Guide
Table Of Contents
- Table of Contents
- Preface
- 1: Overview
- 2: Installation Process
- 3: Operational Description of Antenna Configuration and RF Output Power Setting
- 4: Specifications
- 5: Regulatory Information
2 Installation Process
Verifying the Box Contents
Professional Installation Instructions
Mounting Brackets and Accessories Usage
Mounting to a Suspended/Drop ceiling
Mounting to a Wood Wall/Solid Flat Ceiling
Mounting to a Junction/Gang box
Mounting the AP to a Beam
Connecting the Power Supply
Follow this procedure to install AP3915e:
1 Verify the box contents.
2 Review the Safety Guidelines.
3 Read the Professional Installation Instructions.
4 Mount the AP to a flat ceiling, juction/gang box, or a suspended ceiling.
Note
An optional bracket P/N 30516 (WS-MBI-WALL04 wall mounting bracket) is sold
separately. This bracket is used for mounting the AP on a flat ceiling, suspended or drop
ceiling, or junction/gang box.
5 Connect the Power Supply to the AP3915e access point.
Verifying the Box Contents
Before you install the AP3915e access point, make sure that you have all the necessary parts.
1 Verify that the box contains the following items:
Table 6: AP3915e Box Contents
Items Quantity
1 AP3915e Quick Reference Guide
1 Quick Start Card
1 WS-AP3915e-AP
1 Mounting Bracket for 802.11ac Indoor AP assembled onto the AP
2 Philips Pan-head wood screws
2 Screw-in anchors
ExtremeWireless™ AP3915e FCC/ROW Install Guide 10