Installation Guide
Table Of Contents
- Table of Contents
- Preface
- 1: Overview
- 2: Installation Process
- 3: Operational Description of Antenna Configuration and RF Output Power Setting
- 4: Specifications
- 5: Regulatory Information
1 Install the WS-MBI-WALL04 bracket onto a wall/ceiling with two screws and anchors and ensure
that the locking tab is on the top side.
Figure 10: Mounting the AP using the WS-MBI-WALL04 Bracket
•
Use the WS-MBI-WALL04 as a template and mark the holes to be used to mount the AP. It is
recommended to use the holes marked "A" or "B".
•
Drill the holes and attach the bracket using the screws and screw-in anchors.
Note
When using the "A" or "B" holes, if the holes are not near the corners of the bracket, you
can break o the corner to decrease the bracket's visibility once the AP is installed.
Installation Process
ExtremeWireless™ AP3915e FCC/ROW Install Guide 20