Installation Guide
Table Of Contents
- Table of Contents
- Preface
- 1: Overview
- 2: Installation Process
- 3: Operational Description of Antenna Configuration and RF Output Power Setting
- 4: Specifications
- 5: Regulatory Information
1 Attach the adapter to the mounting bracket by using a twisting motion.
Figure 14: Attaching the beam clip to the main mounting bracket
2 Attach the mounting bracket to the AP.
3 Place the adapter on a beam in such a way that there is enough space between the screw and clamp
to be tightened.
4 Use the screw and clamp on the top of the adapter to secure the AP in place on the beam.
Figure 15: Attaching the beam clamp on a beam
Installation Process
ExtremeWireless™ AP3915e FCC/ROW Install Guide 25