Installation Guide

2 Install the Access Point
AP410i/e Box Contents
Access Point Installation Options and Accessories Information
Install the Access Point on a Drywall or Wood Wall or to a Solid Flat Ceiling
Install the Access Point on a Suspended or Drop Ceiling with a Flat T-bar
Install the Access Point on a Junction Box or Gang Box
Install the Access Point on a Beam
The access point is installed on flat surfaces such as drywall or wood wall, solid flat ceiling, suspended
or drop ceiling with T-bar, to beams, or to a junction or gang box. Optional adapters and brackets are
available for mounting the access point to non-flat ceiling tiles and T-bars.
See purchase order information for details on access points and optional brackets part numbers.
Before installing the access point:
1 Verify the box contents.
2 Visually inspect the access point, the bracket, and any other optional accessories you have ordered
for physical damage.
Contact Extreme Networks Support if there is any damage.
3 Read and review the safety guidelines.
AP410i/e Box Contents
When you purchase the AP410i or AP410e access point, ensure that the following items are available in
the box:
•
An AP410i/e Quick Reference
•
One access point (AP410i or AP410e)
•
A stainless-steel mounting bracket for 802.11ax indoor access point
•
Two Phillips pan head wood screws
•
Two screw-in anchors
Quantity
Item
1
1
1
ExtremeMobility™ Access Points AP410i/e 10