Installation Guide
Table Of Contents
- Table of Contents
- Preface
- 1: Product Overview
- 2: Install the Access Point
- AP410i/e Box Contents
- Access Point Installation Options and Accessories Information
- Install the Access Point on a Drywall or Wood Wall or to a Solid Flat Ceiling
- Install the Access Point on a Suspended or Drop Ceiling with a Flat T-bar
- Install the Access Point on a Junction Box or Gang Box
- Install the Access Point on a Beam
- 3: Antenna Configuration for External Antenna Model Access Point
- 4: Access Points Specifications
- 5: Regulatory Information
- Safety Guidelines
- MPE Statement for Mobile Devices
- Federal Communications Commission (FCC) Notice
- Industry Canada Notice
- Detachable Antenna Usage
- Australia Notice
- Brazil Anatel Statement
- Hazardous Substances
- Supplement to Product Instructions
- NCC Statement
- CE Information
- European Waste Electrical and Electronic Equipment (WEEE) Notice
- Declaration of Conformity in Languages of the European Community
- Index
•
AP410i: Eight WiFi internal antennas and one BLE internal antenna
•
AP410e: Six RP-SMA external antenna ports and one BLE RP-SMA antenna
•
Temperature:
•
AP410i: 0°C to +50°C (32°F to +122°F) @ 6000 ft.
•
AP410e: -20°C to +55°C (-4°F to +131°F) @ 6000 ft.
•
Enclosure: Plastic with metal base
AP410i/e Power Source
Power source Description
Power over Ethernet (PoE) Power is provided through the 2.5 GE multi-rate
Ethernet ports of AP410i/e, compliant to be powered
with 802.3at and 802.3bt to provide full functionality.
For reduced functionality, use 802.3af.
External 12V DC optional power supply Power is provided through an external DC power supply
plugged into an AC source. A GPIO connection is
required to indicate that an external 12V DC power
supply is present.
LED Indicators
The LED indicators are located on the front face of the access point but are not visibly marked.
Table 6: AP410i/e LED indicators
LED indicator LED color Description
Status Green Normal operational status
Amber Non-operational status
GE1 Ethernet Amber 100 Mbps
Green 1000 Mbps
Purple 2.5G
GE2 Ethernet Amber 100 Mbps
Green 1000 Mbps
Radio 1 Green 2.4G activity
Radio 2 Amber 5G activity
Radio 3 White Sensor activity
IoT radio (BLE) Blue Indicates BLE is enabled
Product Overview
ExtremeMobility™ Access Points AP410i/e 9