Specifications
Table Of Contents
- Contents
- Overview
- Feature Corrections in ExtremeXOS 12.6.2
- New Features and Functionality in ExtremeXOS 12.6.1
- New Hardware Supported in ExtremeXOS 12.6.1
- Hardware No Longer Supported
- Supported Hardware
- BlackDiamond 8800 Series of Switches Component Support
- BlackDiamond 10808 Switch Component Support
- BlackDiamond 12800 Series Switches Component Support
- BlackDiamond 20800 Series Switch Component Support
- Summit X150 and X350 Component Support
- Summit X250e Component Support
- Summit X450a and X450e Component Support
- Summit X460 Component Support
- Summit X480 Component Support
- Summit X650 Component Support
- SFP (Mini-GBIC) Support
- XENPAK Module Support
- XFP Module Support
- Upgrading to ExtremeXOS
- Downloading Supported MIBs
- ExtremeXOS Command Line Support
- Tested Third-Party Products
- Extreme Switch Security Assessment
- Limits
- Open Issues, Known Behaviors, and Resolved Issues
- Open Issues
- Known Behaviors
- Resolved Issues in ExtremeXOS 12.6.2-patch1-9
- Resolved Issues in ExtremeXOS 12.6.2-patch1-8
- Resolved Issues in ExtremeXOS 12.6.2-patch1-6
- Resolved Issues in ExtremeXOS 12.6.2-patch1-5
- Resolved Issues in ExtremeXOS 12.6.2-patch1-3
- Resolved Issues in ExtremeXOS 12.6.2-patch1-2
- Resolved Issues in ExtremeXOS 12.6.2
- Resolved Issues in ExtremeXOS 12.6.1
Open Issues, Known Behaviors, and Resolved Issues
ExtremeXOS 12.6.2 Release Notes
94
SummitStack
PD4-2233266555,
PD4-2057876228
UPM profile execution status remains in running state after a SummitStack failover.
PD4-2184877849 When using IdMgr, a switch is not syncing a dot1x identity domain and role information
with a backup slot. The switch shows identity information without the role information,
which is being left blank.
PD4-2209090695,
PD4-1771248139
In some cases, an SSH key may not be check pointed to backup node on a
SummitStack.
PD4-2211004528,
PD4-2204361124
Cross ASIC multicast forwarding does not work using static FDB entries with learning,
multicast flooding, and IGMP snooping disabled.
PD4-2221911417,
PD4-2213319763
HAL stack utilization is approximately 98% and a stack overrun crash occurs when
repeatedly configuring and unconfiguring an ACL with traffic.
PD4-2189094555,
PD4-2112303228
An ELRP loop occurs after rebooting a Summit X450e-48p stack because of a delay in
EAPS convergence.
PD4-1918982514 The motion sensor control for LED power savings is not working on Summit X670
switches.
PD4-1908119150 A SummitStack does not use the MAC address of the stack for ARP replies when
communicating with other devices.
PD4-2133805181 Summit X450a-24t switches with IDM do not detect Kerberos user movement from one
port to another.
ACL
PD4-2253921953,
PD4-2137222784
When a policy file is changed, the changes are not available after an MSM failover.
BGP
PD4-2050362299 All BGP routes are denied when "match community" is used as part of a policy file.
OSPF
PD4-2087108158,
PD4-1196732534
Receiving an OSPF LSA ACK message with an invalid LSA type value causes an
assertion failure in the OSPF process.
Table 46: Resolved Issues, Platform-Specific and Feature PDs (Continued)
PD Number Description