Installation Instructions

Figure 2: Rack installation
4.
Verify that the switch is securely fastened to the rack.
Connecting AC power
Before you begin
• Ensure to check AC power specifications for the switch.
• Ensure to check the AC power cord for international use. You must use a power cord that is
approved for the receptacle type in your country.
For more information, see
AC power cord specifications on page
3.
Procedure
1. Connect the AC power cord to the back of the switch, and then connect the cord to a power
outlet.
Note:
ERS 3600 Series does not have a power switch. When you connect the AC power cord
to a suitable AC power outlet, the switch powers up immediately
.
November 2017 Installation Job Aid for Ethernet Routing Switch 3600 Series 8