Specifications

5
WWW.EXTREMENETWORKS.COM
Selected Specifications
General
• Physical Connectivity
• 1000BASE-T Access Ports (supporting both Half and Full-Duplex)
4
• 10GBASE-SFP+ Network Uplink Ports
• Switching Fabric (Full-Duplex)
• 212Gbps for 28-port models (except 5928MTS-uPWR)
• 284Gbps for 5928MTS-uPWR model
• 260Gbps for 52-port models
• 356Gbps for 100-port models
• Frame Forwarding (Full Duplex)
• 190.5Mpps for 28-port models (except 5928MTS-uPWR)
• 298Mpps for 5928MTS-uPWR model
• 262Mpps for 52-port models
• 405Mpps for 100-port models
• Nominal Latency: 3.5 microseconds for 64 Byte packets
• Nominal Jitter: 0.84 microseconds for 64 Byte packets
• Frame Length: 64 to 1518 Bytes (Untagged), 64 to 1522 Bytes (Tagged)
• Jumbo Frame: up to 9,216 Bytes (802.1Q Tagged)
• Stackable Chassis Throughput: 84Gbps (Full-Duplex) per Switch, up
to 672Gbps
Layer 2
• MAC Address: up to 32,768
• Port-based VLANs: 1,024
• MSTP Instances: 8
• MLT/LACP Groups: 32
• Links per MLT/LACP Group: 8
• DHCP Snooping Entries: up to 1,024
• 802.1X Clients: up to 768
• LLDP Neighbors: up to 800
• Extreme SLPP Instances: 128
Layer 3 IPv4 Routing Services
• ARP Entries: 4,096
• Static ARP Entries: 256
• IP Interfaces: 256
• CLIP Interfaces: 16
• IP Routes: to up 4,096
• IP Static Routes: 512
• RIP Interfaces: up to 64
• RIP Routes: up to 4,096
• OSPF Interfaces: up to 64
• OSPF Routes: up to 4,096
• OSPF Areas: 4
• ECMP Groups: 256
• Paths per ECMP Group: 4
• VRRP Interfaces: 64
• IP Route Policies: 128
Layer 3 IPv6 Routing Services
• IPv6 Interfaces: 256
• IPv6 Routes: up to 2,048
• IPv6 Static Neighbors: 256
• CLIP Interfaces: 16
• IPv6 Management Tunnels: 4
• IPv6 Data Tunnels: 8
• IPv4/IPv6 Dual Stack
• Router Advertisement Guard
• DHCPv6 Guard
• MLDv1/v2 Snooping
• Duplicate Address Detection and Snooping
• Neighbor Unreachability Detection and Filtering
Multicast
• IGMP Enabled VLANs: 256
• PIM Passive Interface: 60
• IP Multicast Groups: 1,024
• PIM Active Interfaces: 4
• PIM-SSM Static Channels: 512
Fabric Connect
• IEEE 802.1aq/RFC 6329 Shortest Path Bridging with custom extensions
• MAC Addresses: 32,000
• IS-IS Adjacencies: 4
• Fabric Attach modes: Server, Proxy, and Standalone Proxy
• BCB/BEB Nodes per Region: 1,000
• BEB Nodes per VSN: up to 750 (soft ceiling)
• L2 Virtual Service Networks: 1,000
• IP Shortcut Routes: 2,000
QoS and Filtering
• Priority Queues: 8
• Ingress and Egress ACLs: up to 256 per Precedence, up to 16
Precedence instances
• ACL Filters: up to 4,096
Operations and Management
• Port and VLAN-based Mirroring IPFIX Sampled Flows: up to 100,000
Enterprise Device Manager GUI, on-box
• Mirroring Instances: 4 sFlow Flow Sampling and o-box
• Auto-MDIX Detection
4
• Time-Domain Reflectometry
4
• SSHv2 with AES128
Support Transceivers
5
• 10GBASE-T SFP+, up to 100m over
• CAT6a UTP
• 10GBASE-LRM SFP+, up to 220m
• over FDDI-grade MMF
• 10GBASE-SR/SW SFP+, up to 300m
• over MMF
• 10GBASE-LR/LW SFP+, up to 10km over SMF
• 10GBASE-BX10 SFP+, up to 10km over SMF
• 10GBASE-ER/EW SFP+, up to 40km over SMF
• 10GBASE-ZR/ZW SFP+, up to 80km over SMF
• 10GBASE-CX Direct-Attach Cable, up to 3m over Twinax
• 10GBASE-CX Direct-Attach Cable, up to 5m over Twinax
• 10GBASE-CX Direct Direct-Attach Cable, up to 10m over Twinax
4
The ERS 5928MTS-uPWR model supports 100Mbps/1000Mbps/2.5Gbps and Full-Duplex operation on access ports; 10Mbps and/or Half-Duplex
are not supported. Additionally, the ERS 5928MTS-uPWR does not support TDR.
5
A mix of both conventional and DDI Transceivers are supported. Additionally, SFP+ sockets are also capable of supporting a wide range of 1 Gigabit
Ethernet Transceivers. Please refer to the product documentation for full details and a complete listing of all specifications and compliance.
Physical Specifications
(Weights include Base Unit with single Power Supply)
Model Height Width Depth Weight
1 RU Models 44 mm 442 mm 488 mm 7.6-8.6 kg
2 RU Models 88.5 mm 442 mm 488 mm 11.9 12.9 kg