User's Guide

• Set Client Type - Sets the Client Type for Wireless Clients as defined in the filter(s).
• ACL - Enables the Access Control List on switches that meet the conditions defined in the filter(s).
• Port Suppression - Suppresses communication between unauthorized devices and switches on your
network as defined in the filter(s).
• Termination - Terminates devices that meet the conditions defined in the filter(s).
• AP Test - Runs an AP Test using the specified profile if the conditions defined in the filter(s) are met.
• Frame Capture - Monitors and analyzes real-time data trac flow from devices in your wireless LAN
and saves the data in a file if the conditions defined in the filter(s) are met.
• Vulnerability Assessment - Runs an vulnerability assessment using the specified profile if the
conditions defined in the filter(s) are met.
• Delete Device - Deletes any device from your system that meets the criteria defined in the filter(s).
• Email - Sends an email to the administrator if the conditions defined in the filter(s) are met.
Use the
icon to add an action to your Device Action Manager Rule Set. You can add up to five (5)
rules for each rule set. Configuration settings will be dierent for each action. For example, the
following is the configuration settings when you select Email as your action.
Figure 58: Action - Send Email
The send email action enables to send an email when the conditions specified in the Criteria tab are
met. You can send mails to multiple persons with customized subject, priority, and the email from which
this mail is supposed to originate.
When you create an action, its name is added to the top of the Actions tab.
To delete a specific action, use the small X button located to the top right of the action's name in the
tab. When you click the button, the action is immediately removed.
Once you have configured your Device Action Manager Rule Set, click the APPLY button located to the
top right of this window. The rule is saved and is added to the list of Device Action Manager rule sets.
The following image is of a fully configured Device Action Manager Rule Set.
Add a Device Action Manager Rule Set
Configuration
220 Extreme AirDefense User Guide for version 10.5.