Installation Guide

Configuring the ExtremeAnalytics Engine
49 of 65
1. In the Console tab of the vSphere client, login as root with no password, and then
press [Enter].
The following screen appears.
==========================================================
Extreme Networks, Inc. - ProductSeries Appliance -
Welcome to the ExtremeAnalytics Appliance Setup
==========================================================
Please enter the information as it is requested to
continue with the configuration. Typically a default value
is displayed in brackets.
Pressing the [enter] key without entering a new value will
use the bracketed value and proceed to the next item.
If a default value cannot be provided, the prompt will
indicate that the item is either (Required) or (Optional).
The [enter] key may be pressed without
entering data for (Optional) items. A value must be
entered for (Required) items.
At the end of the setup process, the existing settings
will be displayed and opportunity will be provided to
correct any errors.
==========================================================
Press [enter] to begin setup or CTRL-C to exit:
2. Press
[Enter] to begin the setup.
The Root Password Configuration screen appears:
=========================================================
Root Password Configuration
==========================================================
There is currently no password set in the system
administrator account (root). It is recommended that you
set one that isactive the first time the machine is
rebooted.
==========================================================
Would you like to set a root password (y/n) [y]?
Note: You must set a new root password. This new root password will
be used by the initial user when logging in to the ExtremeAnalytics
application.