Installation Guide

Configuring the ExtremeAnalytics Engine
50 of 65
3. Press [Enter] to set a new root password.
The following text appears where you can enter the new password:
Enter new UNIX password:
Retype new UNIX password:
4. From the ExtremeAnalytics Appliance (Engine) Deployment Modes screen, select
the deployment mode that matches your network environment.
The default deployment mode is 2.
==========================================================
ExtremeAnalytics Appliance Deployment Modes
==========================================================
This appliance supports multiple deployment modes to suit
different network environments and connectivity
characteristics. Please select a deployment mode below
that best fits your requirements.
0. Single Interface
A single interface is used for both management and
monitoring traffic.
Suitable for feeds from XOS/VOSS/SLX switches.
1. Single Interface With Tunnel
A single interface is used for both management and
monitoring traffic.
A GRE Tunnel will be configured for traffic
monitoring.
Suitable for feeds from Coreflow switches.
2. Interface Mirrored
Separate interfaces are configured for management and
monitoring traffic.
The monitoring interface will put into tap mode for
traffic monitoring.
Suitable for feeds from XOS/VOSS/SLX switches.