Installation Guide

Configuring the ExtremeAnalytics Engine
54 of 65
Enter the SRC IP address for the GRE Tunnel
[10.54.222.117]:
Enter the DST IP address for the GRE Tunnel [192.168.1.1]:
10.54.2.117
Add another GRE Tunnel (y/n) [n]? n
11. A screen appears asking you to confirm your network setting. Enter 0 to accept the
settings.
The following example shows the Confirm Network Settings screen for
deployment mode 2.
==========================================================
Confirm Network Settings
==========================================================
These are the settings you have entered. Enter 0 or any
key other than a
valid selection to continue. If you need to make a change,
enter the
appropriate number now or run the
/usr/postinstall/dnetconfig script at a
later time.
==========================================================
0. Accept settings and continue
1. Hostname: pv88
2. Deployment Mode: Dual
Interface Mirrored
3. Management Interface Configuration (eth0):
Address: 10.54.184.88
Netmask: 255.255.255.0
Gateway: 10.54.184.1
Nameserver: 10.54.188.120
Domain name: nac2003.com
4. NIS Server/Domain: Not Configured
5. Monitor Interface Configuration:
Tap Mode Interfaces: eth4, eth5