User Guide

Pairing Secondary Device
ExtremeLocation Toolbox enables you to use the 2.4 GHz and 5.0 GHz radios simultaneously for RTLS
calibration. However, since a calibrating device can only connect on one radio band, you have to use two
devices to simultaneously calibrate RTLS on both the radio bands.
The ExtremeLocation Toolbox enables simultaneous calibration by pairing the main device (Primary
Device) with another device (Secondary Device) running in the other radio band. The ExtremeLocation
system then tracks these two devices together and creates a heat map of the floor with the data
generated by these devices.
Important
Extreme Networks recommends that you pair your devices from within the ExtremeLocation
Toolbox interface. Bluetooth pairing of primary and secondary devices outside of
ExtremeLocation Toolbox application is not supported.
Note
On your primary device, you must have created your path for performing RTLS calibration.
You must have reached this stage in the RTLS calibration process as described in Calibrating
RTLS step 12 on page 33
To pair a primary device with a secondary device:
1 On the primary device, for the Calibration for field, tap the drop-down list to expand it. The
following screen displays.
Select Dual Band from the screen.
On the secondary device, launch the ExtremeLocation Toolbox app and from its login screen, tap the
Set as primary device option to de-select it.
Before You Begin
ExtremeLocation Toolbox Guide 15