Quick Start Guide

Field Description
Name Displays the name assigned to this beacon.
MAC Address Displays the MAC address of this beacon.
Site Displays the name of the site where this beacon is deployed
Category Displays the name of the category to which this beacon is associated.
Interval Displays the configured beacon broadcast interval for this beacon.
Radius Displays the Radius value for this beacon. This indicates the broadcast
strength of the beacon.
Firmware Displays the Firmware version supported by the beacon.
UUID Displays the unique UUID assigned to this beacon.
Type Displays the type of beacon.
Battery Displays the remaining battery life of this beacon.
Note: Battery information for a beacon depends upon it being reported
by a mobile app with Extreme SDK that is in the beacon's vicinity.
Status Displays the status of the beacon.
Note
You cannot add or modify beacons using this screen.
No beacons are displayed for this category as they have not been assigned this category
yet.
Step 6: Configure the ExtremeLocation Service
The ExtremeLocation Service configuration activities such as creating and managing sites, adding
floors, and others activities are performed through the Sites screen. The following activities can be
performed:
•
Create a Site.
•
Allocate licenses to the site.
•
Allocate access points to the site.
•
Allocate beacons to the site.
•
Place an access point on a floor map in the site.
•
Place beacons on a floor map in the site.
•
Create Regions/Category/Zones for the site.
•
Customize ExtremeLocation to use terms that are common within your industry vertical.
Add a Site
Sites are locations that are monitored using the ExtremeLocation system. A site is a physical area such
as a store, a hotel, or a hospital. It can also be a venue such as a shopping mall or an airport for which
you capture locationing data. A typical site is made up of one or more floors which are further divided
ExtremeLocation Quick Setup
ExtremeLocation Quick Start Guide 41