Specifications

394 ExtremeWare XOS 10.1 Command Reference Guide
STP Commands
disable stpd rapid-root-failover
disable stpd <stpd_name> rapid-root-failover
Description
Disables rapid root failover for STP recovery times.
Syntax Description
Default
Disabled.
Usage Guidelines
After you have created the STPD with a unique name, the keyword stpd is optional.
To view the status of rapid root failover on the switch, use the show stpd command. The show stpd
command displays information about the STPD configuration on the switch including the
enable/disable state for rapid root failover.
Example
The following command disables rapid root fail over on STPD Backbone_st:
disable stpd backbone_st rapid-root-failover
stpd_name Specifies an STPD name on the switch.