Specifications

468 ExtremeWare XOS 10.1 Command Reference Guide
IP Unicast Commands
enable icmp timestamp
enable icmp timestamp {vlan <name>}
Description
Enables the generation of an ICMP timestamp response on one or all VLANs.
Syntax Description
Default
Enabled.
Usage Guidelines
Enables the generation of an ICMP timestamp response (type 14, code 0) when an ICMP timestamp
request is received. If a VLAN is not specified, the command applies to all IP interfaces.
This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually
forwarded by the switch is controlled by the access-list commands.
Example
The following command enables the generation of an ICMP timestamp response on VLAN accounting:
enable icmp timestamp vlan accounting
name Specifies a VLAN name.