Specifications

56 ExtremeWare XOS 10.1 Command Reference Guide

Commands for Accessing the Switch

enable clipaging

Description

Enables the pause mechanism and does not allow the display to print continuously to the screen.

Syntax Description

This command has no arguments or variables.

Default

Enabled.

Usage Guidelines

The command line interface (CLI) is designed for use in a VT100 environment. Most show command

output will pause when the display reaches the end of a page.

If CLI paging is enabled and you use the show tech-support command to diagnose system technical

problems, the CLI paging feature is disabled.

CLI paging is only active on a per-shell session basis. In other words, when you enable or disable CLI

paging from within the current configuration, it only affects that session. For new or existing sessions,

paging is enabled by default. This setting cannot be saved.

Example

The following command enables clipaging and does not allow the display to print continuously to the

screen:

enable clipaging