Specifications

738 ExtremeWare XOS 10.1 Command Reference Guide
Configuration and Image Commands
unconfigure switch
unconfigure switch {all}
Description
Returns the switch configuration to its factory default settings.
Syntax Description
Default
Resets configuration to factory defaults without reboot.
Usage Guidelines
Use unconfigure switch to reset the configuration to factory defaults, but without erasing the
configuration and rebooting. This preserves users account information, date and time settings, and so
on.
Include the parameter all to clear the entire current configuration, including all switch parameters, and
reboot using the last used image and configuration.
Example
The following command erases the entire current configuration, resets to factory defaults, and reboots
the switch using the last specified saved image and saved configuration:
unconfigure switch all
all Specifies that the entire current configuration should be erased, and the switch
rebooted.